iHealth BG5 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} iHealth BG5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. iHealth BG5 2 페이지. Wireless smart gluco-monitoring system
iHealth BG5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 소유자 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (7 페이지)

페이지 인쇄

Pull off the lancet device

cap

Twist off the lancet protective

disk

Set a lancing level

Puncture your ﬁngertip

Insert a new lancet ﬁrmly

into the lancing device cup

holder

Replace the lancing device

cap

Lock the handle

Step 5: Obtain a Blood Sample

Press the lancing device against the site to be lanced.

Press the release button to puncture your ﬁngertip. Gently

squeeze and/or massage your ﬁngertip until a round drop of

blood at least 0.7 micro liter forms on your ﬁngertip.

Note: For Alternative Site Testing and Control Solution

Testing, it is recommended that you read the iHealth

Wireless Smart Gluco-Monitoring System's Owner's Manual.

Step 6: Apply the Blood Sample to the Test Strip

Apply the blood sample to the absorbent hole of the test

strip. Make sure the conﬁrmation window of the test strip is

completely ﬁlled with the blood sample. Follow the

on-screen instructions in the App to complete the blood

glucose testing.

Step 7: Remove Test Strip from the Blood Sample

Your iOS device will beep when you should remove the test

strip from the blood sample.

Step 8: Read the Test Results

Wait for about 5 seconds, your blood glucose

result will appear on the iOS device screen.

Step 9: Discard the Used Test Strip and

Lancet

Remove the used test strip from the

glucose meter using a small amount of

tissue paper. Discard the used test strip

and lancet properly. (Tip: Stick the lancet

in the protective disk and dispose

properly.)