High Lifter CLK570L-00 매뉴얼 - 페이지 7

{카테고리_이름} High Lifter CLK570L-00에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter CLK570L-00 11 페이지.

16) Before you connect the top of the shock to the brackets place the inner fenders in place but do not connect

them.

17) Now, connect the top of the shock to the brackets using a 10x65 hex bolt, front 18S spacer, and 10mm lock

nut. The smaller spacer needs to go between the shock eye and the small front lift bracket.

18) Tighten all bolts, and then you can replace the inner fender.

19) Repeat these steps for opposite side.

20) Be sure that all lugs are torqued to factory specifications.

21) Place wheels back onto ATV and lower jack.

CLK570L-00