AgroArt Easy Grow A48 설치 매뉴얼
{카테고리_이름} AgroArt Easy Grow A48에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AgroArt Easy Grow A48 5 페이지. 48 planter structure system
페이지 인쇄Installation Manual: Easy Grow A48 (48 Planter) structure system
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing Easy Grow A48 hydroponic system. When properly assembled and maintained,
this system will provide years of reliable service. These instructions include helpful hints and important
information needed to safely assemble and properly maintain the system. Please read these instructions
before you begin.
If you have any questions during the assembly, contact Customer Service at +91 77859-77859 for
assistance.
UNPACK AND IDENTIFY PARTS
1. Unpack the contents of the shipment and place where you can easily inventory the parts. Refer to the
Bill of Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec Sheets are present. If anything is missing or you
have questions, consult the Pictorial Parts Guide and all diagrams for clarification, or contact Customer
Service.
PICTORIAL GUIDE
The following graphics and photos will help identify different parts of the EASY GROW hydroponic
system. (Some parts may not be shown)
1) A shape Iron frame Qty - 2
3) 75mm Pipes connected with Reducers and 2'' Pipes Qty – 8
5) Water Pipe T Connector Qty – 1
2) 43'' connectors for Iron Frame Qty - 2
6) Water Pipe Nozzle Qty – 2
4) 40mm Pipe connectors Qty - 6