High Link GF302 사용자 설명서 - 페이지 6
{카테고리_이름} High Link GF302에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. High Link GF302 15 페이지. Voip phone
페이지 인쇄3.1.3 SIP settings
When running with firmware based on sip protocol,sip setting can be access here.if based on iax2 protocol,iax2 setting s can
be access here.you can upgrade firmware from sip to iax2 or from iax2 to sip with web browswer or TFTP
Option
SIP registration
SIP server
Sip server port
SIP domain
SIP server as outbound proxy
Use DNS SRV
SIP user ID
SIP authenticate ID
SIP authenticate password
User Name
local SIP port
local RTP port
Register expiration
Keep alive interval
Send DTMF
DTMF payload type
Message service number
SUBSCRIBE for MWI
Support PRACK
Proxy Require
Nat Traversal
Nat IP
STUN server
STUN server port
Default Value
No
5060
No
No
5060 local port to send and received register message
6000 local port to send and received for RTP
Inband audio
101 the indicating Value of RTP payload type
No
No
Disable
3478
Description
Make calls through SIP Proxy Server If enable;otherwise,
only IP-to IP calls is allowed.
SIP Proxy Server for all outbound requests
SIP Proxy Server port
Domain name of the SIP Proxy Server
Enable/disable Outbound proxy
Enable/disable SIP Proxy used DNS Server record to reach
a user within the domain and to point to a SIP Proxy
somewhere
User ID, usually same as phone number
SIP service authenticate ID
Password for authenticate ID
user name that will be displayed in LCD
Expires value in a REGISTER request.A registration will
periodically renew shortly before the current registration
60
expired.
This parameter specifies how often a blank UDP packet is
sent to the SIP server in order to keep the port mapping on
20
the NAT device
Set DTMF methods: Inband audio, RFC2833 and sip info
the numbers of the voice-mail for inquiry
When set to YES, A subscribe for message waiting
indication will be sent periodically
Enable/disable support pre-ack (100rel, RFC3262)
This field is used to indicate proxy-sensitive features that
MUST be supported by the proxy.
select NAT Traversal type : Disabled, use STUN server
and use NAT IP
NAT Traversal server address
STUN server address
service port for STUN server