DCA Z1J-FF03-13 사용 설명서 - 페이지 6

{카테고리_이름} DCA Z1J-FF03-13에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DCA Z1J-FF03-13 7 페이지. Electric impact drill

Remove the handle cover by

loosening the screws on it with a

screwdriver, and remove the holder

plate. Pull out the brush holder and

disconnect the wire connecting to

the stator, then remove the worn

out carbon brushes and replace

new ones. Replace the brush

holder and the holder plate, and

then reinstall the handle cover by tightening the screws. (Fig. 7)

CAUTION:

 Carefully ascertain that the internal wiring and so on are located at their regular

positions and that there is no possibility of the rotary part (armature) being

contacted by the internal wiring or other items.

 Be careful not let the internal wiring be caught in it to avoid the risk of electric

shock when reinstalling the handle cover.

※To maintain product SAFETY and RELIABILITY, repairs, any other maintenance

or adjustment should be performed by authorized service centers, always using

original replacement parts.

if the supply cord of this power tool is damaged, it must be replaced by a specially

prepared cord available through the service organization.

Service center:

ZHENGDA TOOLS [M] SDN BHD

No. 18-22, Jalan Haji Abdullah Sg.Abong , 84000 Muar , Johor. W. Malaysia

-9-

-10-