Autonomous Smartdesk 3 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Autonomous Smartdesk 3에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonomous Smartdesk 3 15 페이지.

Fully separate the Crossbar Ends

(P3) by using Allen Wrench to

unscrew M6x10.

You will ﬁnd the Crossbar Center

Rails (P4) inside.

Place the Legs (P1) into the Crossbar

End (P3), line up the frame's and the

leg's screw holes. Firmly secure the

legs using M6x14 screws. You will

need to ﬂip the legs to gain access to

all 4 screws.