Autool BT-660 사용자 설명서 - 페이지 8
{카테고리_이름} Autool BT-660에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool BT-660 9 페이지. Battery system tester
Autool BT-660에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지)
페이지 인쇄
replaced.(Some old style cars are using external regulator, then
directly replace the regulator.) The normal high volt of the voltage
regulator is maximum 14.7±0.5V. If charging volt is too high, it will
overcharge the battery. Therefore, the battery life will be shortened
and troubles will be caused.
4.No Volt Output. No generator volt output is detected. Check the
generator connection cable, the drive belt of generator and engine
whether normal or not.
5.Diode Test: Through the test of charging current ripple, tester will
find out whether the diode is normal or not. When ripple volt is too
high, it proves at least one diode is damaged. Check and replace
the diode.
(4) Review Data
After entering the forth function, then press OK key you can view
the final test result.
(5) Print Data
About Printing function, please contact with customer service.
(6) Export Data
Contact this battery tester to computer with Data Line, you can
download the print software from our web at
www.atuooltech.com
If
any questions,please contact us.