high pointe RocketRAID 2840A 사용자 설명서 - 페이지 8

{카테고리_이름} high pointe RocketRAID 2840A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. high pointe RocketRAID 2840A 16 페이지. Sas 6gb/s pci-express 3.0 x8 raid controller

페이지 인쇄
high pointe RocketRAID 2840A 사용자 설명서

3.1.4 Creating RAID Arrays

Initializing Disks:
Before creating a RAID array, the disks must be initialized. Disk
initialization writes necessary RAID configuration information to the hard
disks. Select the Initialize command from the toolbar, and press the Enter
key.
Highlight the target disks using the arrow keys, and then press the Enter
key. A numeral will be displayed before each selected disk. Once all
target disks have been selected, press ESC key. The utility will display a
warning, and ask you to press Y (yes) to initialize, or N (no) to cancel.
Once initialized, these disks can be used to create RAID arrays. These
disks will be displayed as "Initialized" (under Status).
Warning: Initialization will destroy all pre- existing data on the selected
hard disks. Only initialize disks that do not contain critical data.
8