Autool X50 Plus 사용자 설명서 - 페이지 5

{카테고리_이름} Autool X50 Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool X50 Plus 8 페이지. Car obd multi-function meter
Autool X50 Plus에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (14 페이지)

페이지 인쇄

When an acceleration performance test is carried out, set up

an acceleration target speed firstly, and finish the

acceleration performance test after the set speed is

reached. When the brake performance test is undertaken, it

is necessary to set up an initial braking speed firstly; when

the initial brake speed is reached, start to calculate the brake

distance until the car speed is stopped.

Instrument parameter settings

Choose instrument parameter settings, enter the

instrument parameter setting interface, and adjust the

parameter size left and right, long press the function

key to return to the previous menu.

Instrument Parameter Settings

Include the Following Contents

Engine displacement settings - Set up the engine

displacement size, after this parameter is set, the car's

instantaneous fuel consumption and average fuel

consumption are accurately calculated.

Fuel type setting - Choose petrol, diese1, diesel 2; in

different diesel modes, fuel consumption data sees

great changes.

Over-speed alarm - Set up this parameter, when the set

car speed is reached, the instrument will send "drop,

drop" sounds to give an alarm, the car speed text will

display in red.

High water temperature alarm - Set up this parameter,

when the engine reaches the alarm temperature

instrument, "drop, and drop" sounds will be given, at the

same time the displayed temperature character is red.

Shift reminding rotation speed - After this rotation speed

is set, shift reminding status is reached, and a shift

prompt tone will be sent, at the same time, shift

characters display.

Shift reminding upper limit - The car speed reaches the

set value, the shift reminding will be shut down, in case

there are no gears to uplift at the highest gear after the

set car speed is exceeded.