Autool SDT 202 매뉴얼 - 페이지 2

{카테고리_이름} Autool SDT 202에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool SDT 202 3 페이지.

exhaust system and so on.

3. Main Unit Structure

SDT 202 is designed for detecting the leakage of pipe systems on cars, motorcycles, such

as fuel pipe, air intake system and cooling tank.

SDT 202 is for all pipe system and EVAP.

① Oil filler: To fill oil

② Pressure gauge: To indicate the working pressure

③ Working indicator: It is light when the detector works

④ Power switch: Power it on, and the detector works

⑤ Power socket port

⑥ Smoke output: The smoke outlet that connects with smoke tube

4. Operation

1. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be

disconnected in the middle, please secure the other side with a rubber stopple.

3. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.

4. Connect detector with DC12V battery: red with positive, black with negative. Do not

connect in a contrary way.

5. Turn on the power switch, and the detector starts to work.

6. In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use

head lamp if necessary.

7. After leak detection, please connect well the wires and pipe.

5. Maintenance

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect

the service life of smoke generated part, so please change smoke and oil regularly.

1. Before filling fresh oil, please pour out the remaining oil in the detector.

2. When the smoke output has water drops, please replace with fresh oil.

3. Liquid paraffin and baby oil are OK.

Please fill fresh oil with equipped oil bottle