Autool LM 706 매뉴얼 - 페이지 15
{카테고리_이름} Autool LM 706에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool LM 706 15 페이지. A/c service station
페이지 인쇄
Step4: Re-back the cover.
3.12 Help
Here you can check all of the help messages.
3.13 Warning code
code
W01
Refrigerant not enough
W02
Full of tank
W03
Pressure higher
W04
No gas in A/C system
Still have refrigerant in A/C
W05
system
W06
No oil in the bottle
W07
Full of the bottle.
There
is
W08
system
W10
Dry-filter is invalid.
Vacuum
W11
maintenance
3.14 Maintenance
a) The equipment should be regularly treated with exhaust air at least once a week.
b) Clean the filter connector in the old oil bottle regularly, at least once a week, otherwise
the hose will break due to blockage.
c) When the equipment is not in use, please cover it with dust cover.
d) Keep the display screen clean and do not wipe it with volatile or corrosive liquid.
e) Clean up the residue in the old oil bottle of the equipment in time.
f)
Equipment to avoid rain, direct sunlight.
g) Equipment should be used or stored in a flat, cool, clean and ventilated place.
h) The maintenance items indicated by the equipment should be done in time.
When the equipment is not in use for a long time, or when it is loaded and transferred to
i)
another site, it shall be protected with supports under the electronic scale.
message
pressure
in A/C
pump
needs
method
Supply refrigerant to main tank.
Transfer some refrigerant out from the tank.
purify the non-condensable gas 5-8 times
Needn't recovery.
Recovery firstly.
Fill enough oil to the new oil bottle.
Empty the used oil bottle.
Recovery and vacuum firstly, then add the
new oil.
Change a new one.
Exchange the pump oil.
12
LM 706 A/C Service Station