Autool CT150 사용자 설명서 - 페이지 11

{카테고리_이름} Autool CT150에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool CT150 14 페이지. Fuel system cleaner

to the pressure specified by the factory to be inspected, most

Beyond the original factory pressure of 10%), observe

whether the injector is dripping.

After the test is completed, the system will automatically stop

and beep with a buzzer.

Note:

The general requirement is no more than one drop (or

according to technical standards) within one minute.

The system internal setting time defaults to 1 minute.

On-Vehicle cleaning

The hose line connection of the engine with return hose is

shown as in Fig.06.

Disconnect the connections of fuel supply hoses (C

、

fuel return hoses (A

B) of the engine fuel system (wrap the

connector with towel when disconnecting the connector).

Choose proper connectors and connect them to the B end

and C end separately, and then connect the other ends to

corresponding return hose and outlet hose of the unit. See

Fig.06.

Connect the disconnected other ends (A、 D) with proper

hose, or remove the fuel pump fuse, or disconnect the power

cable of engine fuel pump.

Fig.06

1-C100 Injector Cleaner & Tester; 2-Engine; 3- Fuel-return hose

from engine; 4- Fuel-inlet hose to engine; 5-Auto filter; 6-Engine

fuel supply hose; 7-Engine fuel return hose; 8- Auto fuel pump;

9-Auto tank

、

D) and