Autopage C3-RS-603 운영 매뉴얼 - 페이지 4

{카테고리_이름} Autopage C3-RS-603에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage C3-RS-603 13 페이지. Professional remote car starter & keyless entry system with two-way serial port data link

페이지 인쇄

LED DISPLAY:

LED

Function

Off

Unlock

Slow

Locked

Flash

On (Solid)

Valet Mode

CHIRP INDICATOR:

Chirp

Function

1 chirp

Lock

2 chirps

Unlock

PARKING LIGHTS:

Parking light

1 flash

2 flashes

Constant On

Under Remote Start

DEACTIVATING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or

inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON' position.

2. Within 10 seconds push and release the valet switch

VALET MODE:

The valet switch allows you to temporarily bypass all system function,

eliminating the need to hand your transmitter to parking attendants or

garage mechanics. When the system is in valet mode, and remote start

functions are bypassed, Enter Valet Mode:

1. From the Unlock condition, turn the ignition to "ON" position.

2. Push and hold valet switch for 2 seconds until the LED turns on.

The LED will remain on as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'on'.

2. Push and hold valet switch for 2 seconds, The LED will turn off

indicating the system has exited the valet mode.

IGNITION CONTROL DOOR LOCKS.

If the vehicle's door locks have been interfaced to the security system,

the system will automatically lock the vehicle's doors when the ignition

is turned "ON" and /or unlock the vehicle's doors when the ignition is

turned "OFF".

TRUNK RELEASE (Additional Installation Required)

Press and hold the

Function

Lock

Unlock

button on transmitter for two seconds to remote