Autopage C3-RS-625 운영 매뉴얼 - 페이지 12

{카테고리_이름} Autopage C3-RS-625에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage C3-RS-625 18 페이지. Professional 2-way am/am remote car starter and keyless entry system with two-way serial port data link
Autopage C3-RS-625에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

Vibration / Melody Mode:

Vibration mode is useful when you are in a noisy place and it is difficult to

hear the beep sound from the remote control. In this mode the unit will

vibrate if your security system is triggered.

1. Press and hold all four remote control buttons

simultaneously until one long beep is heard.

Programming has now been entered.

2. Within 5 seconds, press the

mode of vibration or melody, the

displayed on the LCD screen to show the LCD

remote transceiver is in vibration mode.

3. To exit programming mode, take no action for five

seconds. The remote control will generate two long

beeps to indicate programming mode has been

exited.

Power Save Mode:

While in the power save mode, the LCD remote transceiver will "sleep" until

a button is pushed. This will extend the life of battery. When power save

mode is "ON", the remote control will wake up periodically to check for

messages from the security module.

1. Press and hold all four remote control buttons

simultaneously unit one long beep is heard.

Programming has now been entered.

2. Within 5 seconds, press the

"On" or "Off". The remote will beep once for "On",

twice for "Off". When power save mode is "On", the

icon on the LCD screens to indicate entry the

"power save mode"

3. To exit programming mode, take no action for five

seconds. The remote control will generate two long

beeps to indicate programming mode has been

exited.

Screen Lamp ON:

Press the

seconds.

Clear the Flash Icon and Melody Sound:

Cycle the ignition then press the

button once and the LCD screen lamp will turn on for 5

button to select the

icon will

button to toggle

button first, within 3 seconds press