DCD Valor G Jet 매뉴얼 - 페이지 14

{카테고리_이름} DCD Valor G Jet에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCD Valor G Jet 15 페이지.

4. Attach the other end of the high-pressure hose to high pressure outlet (A) on

pump. Pull down on collar of quick connect, slide onto pump, and let go of collar.

Note that some pumps require the hose to be threaded on. Tug on the hose to

ensure connection is secure.

*Pump Uses SAE30 Non-Detergent Oil

5. Turn Water Supply on if you have not already done so. Point the gun in a safe

direction and squeeze the trigger to purge the pump of air and debris. Do this for

at least 30 seconds.

6. Take a final look at all connections to make sure there are no leaks or loose

connections. If there are any leaks in hoses, they must be replaced.

IMPORTANT:

Use COLD WATER only (less than 100°F/38°C). Hot water will damage seals and

compromise the integrity of your pump.

7. Attach the garden hose to the water inlet. Tighten by hand.

8. To start the machine, locate the ON/OFF switch on the side of the motor, and

switch it to the ON position.

IMPORTANT:

• Always wear safety goggles when using this equipment or in vicinity of where

equipment is in use.

• Before starting the pressure washer, be sure you are wearing adequate safety goggles.

• NEVER substitute safety goggles with normal glasses.

855.SHOP.DCD l DCDdrain.com

axial pump

DO NOT siphon standing water for the water supply.

Before starting the sewer jetter, ensure you are wearing

adequate safety goggles.

Risk of eye injury.

Spray can splash back or propel objects such as rocks, dirt and other debris.

WARNING

triplex pump