DCD Valor G Jet 매뉴얼 - 페이지 8

{카테고리_이름} DCD Valor G Jet에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCD Valor G Jet 15 페이지.

• NEVER pull starter cord without first relieving spray gun pressure.

• When starting engine, pull cord slowly until resistance is felt and then pull rapidly to

avoid kickback.

• After each starting attempt, where engine fails to run, always point spray gun in safe direction

and squeeze spray gun trigger to release pressure.

• Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when

spray gun kicks back.

• DO NOT touch hot parts and AVOID hot exhaust gases.

• Allow equipment to cool before touching.

• Keep at least 5 feet (1.5 m) of clearance on all sides of sewer jetter including overhead.

855.SHOP.DCD l DCDdrain.com

Starter cord kickback (rapid retraction) can result in bodily injury.

Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank

causing a fire.

WARNING