Autopage C3-RS-730 LCD 운영 매뉴얼 - 페이지 11
{카테고리_이름} Autopage C3-RS-730 LCD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage C3-RS-730 LCD 18 페이지. Professional 2-way lcd remote car starter & alarm system with built in temperature, voltage sensor and two-way serial port data link
SVMASTER -
1. Before turning off the engine, press the
3 times to confirm enter.
2. Turn the ignition key to OFF position. (The engine will stay running.)
3. The engine will run until the pre-programmed time elapsed or shutdown input is received.
D. TURBO CHARGE MODE:
Turbo charger mode keeps the engine running after arriving at you r destination for a programmable period
of 1, 3 or 5 minutes, This allows the vehicle's engine time to conveniently cool down the turbo after you have
left the vehicle.
To activate:
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, press and release
-- The LED will flash indicating the remote start has entered the turbo charger mode
LCD remote .
3. Take the "Ignition Key" from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
NOTE: This feature only applies to vehicles with Turbo Charged Engines.
E. TIMER START:
This unit can be programmed to start and run the engine every 3 hours or punctually at the same time next
morning, the engine will run for the programmed running time and then shut down.
IMPORTANT
enclosed space as a garage or carport.
Daily Timer Start: The feature is very useful for the driver who wants to run the vehicle punctually at the same
time next morning. Before set-up of the "Daily Timer Start", you should set you time for engine start.( see
Timer Setting / Timer set-up for "Daily Timer Start, in Advanced users Mode)
ENTER:
1. Press the
lights have turned ON or are flashing.
2. Immediately depress the
3-a. 3 Hours Timer Start: Rapidly depresses the
+
buttons = Start / Stop button.) The parking light will flash (3) times /
or horn chirps (3) times. The vehicle is now programmed to start every 3 hours.
3-b. Daily Timer Start: Depress the transmitter's "
parking light will flash (6) times. The siren chirps (6) times. The vehicle is now programmed to start at the
same time of the next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD
screen. After 3 seconds
Or Follow programmed Daily Start Timer on LCD remote in Advanced user mode.
Press
button of LCD remote transceiver to activate or cancel Daily Start feature.
3.
Press the brake pedal to stop the vehicle running.
4.
Please insure that you fully understand this feature before programming the timer start mode.
Exit the timer start: Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The horn chirps (4) times. Or
1. Press the
have turned on or flashing.
SVMASTER -
: Timer Start should be used only in open areas, never start and run the vehicle in on
button once to remote start the vehicle. As soon as the vehicle is running and the parking
button once, within 2 seconds
icon stays displayed on the LCD screen.
button twice to remote start the vehicle. As soon as the vehicle is running and the parking light
http://www.msvmaster.lv
-
button once on the transmitter and the LED indicator will flash
and
buttons at the same time.
button (or depresses
F
" button first, within 3 seconds press the
11
appear on
+
buttons, if you program
icon appear. The siren
button. The
http://www.msvmaster.lv
-