Autopage CAR-PRO CPX-2350 운영 매뉴얼 - 페이지 4

{카테고리_이름} Autopage CAR-PRO CPX-2350에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage CAR-PRO CPX-2350 8 페이지. Professional vehicle security system

2. Push and hold valet switch for 2 seconds or until the LED turns on.

The LED will remain on as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'ON'.

2. Push and hold valet switch for 2 seconds; the LED will turn off

indicating the system is exiting the valet mode.

PANIC FUNCTION:

The transmitter can be used as a remote panic switch to manually trigger

the alarm in case of emergency.

1. Press and hold the

alarm will immediately

2. To stop the alarm, press and hold

panic mode will be turned off immediately.

3. If the button is not pressed, the alarm will automatically stop after 30

seconds.

TRIGGER THE SYSTEM

When armed, your vehicle is protected as follows:

1. Light impacts will trigger the warn-away signal. A long chirp from

siren/horn.

2. Heavy impacts / Doors open / Hood open / Trunk open / Turning on the

ignition switch- All will trigger the programmed sequence.

The starter disable relay (if installed) prevents the vehicle's starter from

cranking. The siren and parking lights will turn on to alert of an intrusion for

30 seconds. Then the siren will stop and automatically reset and re-arm. If

any the sensors or detectors are still active, the alarm system will sound a

maximum of six-30 second cycles.

ANTI CAR-JACKING

Warning: If you don't need the car jacking function in this alarm system, be

sure to set car jacking feature "OFF". This system is default setting Car-

jacking "OFF". (Programmable)

1. TRANSMITTER ACTIVATE THE CAR JACKING:

Press and hold

vehicle's ignition is ON. The parking light wills turns on for 1.5" seconds

to indicate car jacking activated.

2. DOOR SWITCH ACTIVATE CAR JACKING:

1. Turn the ignition switch to "ON" position, the system is armed.

2. Once the system is armed, if you are forced from the vehicle, the system

will active the car jacking trigger when the door is opened and closed

while the ignition is "ON"

TRIGGER THE CAR JACK MODE:

3-timer circuits will function as follows:

button on the transmitter for 3 seconds. The

sound.

button on the transmitter for 1 second while the

button on the transmitter, the