ACTON BLINK BOARD 소유자 매뉴얼 - 페이지 7

{카테고리_이름} ACTON BLINK BOARD에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACTON BLINK BOARD 9 페이지. Electric skateboard, belt drive

IV. CARE &MAINTENANCE

A. Belts, Bearings and Wheels

Belts, Bearings and Wheels may require frequent service depending on how heavily

Blink® is ridden. Gene rally, these components will not be included in the warranty. You

Here is a step list about changing the driving wheel and the belt:

(1)

Loosen the axle nut using the provided skateboard tool

(2)

Pull out and rotate the driving wheel.

Warning: Keep an eye on all the spacers. Don't lose them!

(3)

Unscrew the cap screws and change belt.

(4)

Put everything back into position

WARNING: Do not overtighten the axle nut or you can damage the bearing shields.

Tighten just to the point where the wheel can no longer laterally move along the axle.

B. Other maintenance

Clean the surface of Blink® with a damp, but not overly wet, soft cloth only. Store

Blink® in an indoor and cool environment. Recharge the battery at least once per

month and avoid contacting with volatile liquids including Alcohol or strong cleaning

agents.