Autopage RF-425LCD 운영 매뉴얼 - 페이지 2
{카테고리_이름} Autopage RF-425LCD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage RF-425LCD 14 페이지. Professional vehicle security system
페이지 인쇄
TRANSMITTER OPERATION:
Transmitter
System Function
Button
Lock Doors & Arm System
Panic function
Car Locator
-
Arm and Delete The 2 Stage Shock
Sensor
+
Silent Arming / Disarming
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm
System
Trunk Release (Channel 2)
-
Passive Arming By-pass
Silent Arming/ Disarming
rd
+
3
Channel
th
+
4
Channel
Switching code For 2nd Car
II
Operation.
ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now
armed. The vehicle doors will lock upon arming when interfaced with the security system.
Note: Defective sensor reminder:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
System Arm
Door Ajar
SILENT ARMING / DISARMING: Press the
security system with no chirp sound heard; arm / disarm confirmation will be through the vehicles
parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS:
Press the
button on the transmitter twice within 3 seconds will arm the security system, by-
pass the shock sensor or the optional sensor connected to 4 pin plug. The system will chirp one
additional time to confirm the sensor bypass mode was activated. The sensor bypass feature is
programmed to activate for one arming cycle only. The security system will return to normal
operation during the next arming cycle.
Remark
Press and Hold for 3 seconds
Under armed mode
Press twice within 3 seconds
Ignition in "off" position.
Press twice within 3 seconds.
Press and Hold for 2 seconds
While the system Disarmed.
Press buttons together
Press buttons together
For regular remote transmitter Only
Trunk / Hood Ajar
button on the transmitter to arm or disarm your
2
AJAR WARNING:
If the siren sounds 3
chirps, then you have
left a door, trunk, or
hood lid ajar.