Autopage KE-115 운영 매뉴얼 - 페이지 2

{카테고리_이름} Autopage KE-115에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage KE-115 2 페이지. Professional keyless entry system

PARKING LIGHT INDICATORS

PARKING LIGHTS

Operation

1 Flash + 10 sec on

Locked / The parking lights will remain "on" for 10 seconds

2 Flashes + 30 sec on

Unlocked / The parking lights will remain "on" for 30 seconds

Continuous Flash

Panic Mode Engaged (30 Sec.)

10)

STARTER INTERRUPT CIRCUIT (OPTIONAL)

The vehicles starter circuit may be interrupted for additional protection when the System is

locked. Use of the RK-1 Starter Interrupt Relay kit is recommended.

11)

TRANSMITTER PROGRAMMING

In the event, you should need to add or replace a Remote Control Transmitter, it is

important that you follow the instructions below.

Note:

Each step must be performed within 10 seconds of the previous step otherwise the System

will exit the programming mode.

PROGRAMMING THE REMOTE TRANSMITTER

Enter:

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON

position. Within 15 seconds.

2. Push the Valet switch 2 times. (Holding in on the 2nd push) until you hear a long chirp. The

transmitter is ready to program.

Program:

1. Press any button on

the transmitter until the horn responds with a confirming chirp the first

transmitter is now programmed.

2. Press button on the second transmitter until the horn responds with a confirming chirp, the

second transmitter is now programmed.

3. Apply the same procedure to program 3rd and 4th .

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light

flashes to confirm exit.

Function

KE-115

PROFESSIONAL KEYLESS ENTRY SYSTEM

OPERATIONS MANUAL

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY