Autopage XT-35 for CPX-2600 & CPX-3600 매뉴얼
{카테고리_이름} Autopage XT-35 for CPX-2600 & CPX-3600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage XT-35 for CPX-2600 & CPX-3600 1 페이지. For the cpx-2600 & cpx-3600
XT-35 Transmitter for the CPX-2600 & CPX-3600
PROGRAMMING TRANSMITTER:
Enter:
1. Turn the Ignition switch "OFF/ON" 3 TIMES and stay in ON position. Within 15 seconds,
2. Push the Valet switch 3 times (hold in on the 3
release the valet switch. You are now in the Transmitter programming mode.
Program:
1. Press any button on the first transmitter until the siren responds with a confirming chirp; the
first transmitter is now programmed.
2. Press any button on the second transmitter until the siren responds with a confirming chirp;
the second transmitter is now programmed.
3. Apply the same procedure to program any 3rd and 4
Exit: Turn Ignition to "OFF" position, or leave it for 15 seconds. Three long chirps will confirm
exit.
Note: If more than 4 transmitters programmed, the system will only keep the last 4 transmitters.
PROGRAMMING
rd
push); when one long chirp is heard then
th
transmitters.