dynasonics UFX 사용 설명서 - 페이지 4

{카테고리_이름} dynasonics UFX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dynasonics UFX 16 페이지. Ultrasonic flow meter
dynasonics UFX에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

QUICK-START INSTRUCTIONS

This manual contains detailed operating instructions for the UFX instrument.

The following condensed instructions are provided to assist an experienced

operator in basic operation of the instrument. If the operator is unfamiliar with

this type of instrument, refer to the detailed explanations located at the corre-

sponding letter on pages 8-11.

A. Select a transducer mounting location at least 10 pipe

diameters downstream and 5 diameters upstream of

flow disturbances (i.e. elbows, tees, valves, etc.).

B. On horizontal pipe, choose a

transducer mounting location ap-

proximately 90 degrees from the

top of the pipe.

C. Remove rust, scale and paint

from the transducer mounting lo-

cation. Clean to bare metal.

Plastic pipes do not require

preparation.

D. Plug the transducer plug into

the transducer jack.

STEP A

YES

STEP B

STEP D

YES