High Tech Gio-Bella HTH 888 매뉴얼 - 페이지 7
{카테고리_이름} High Tech Gio-Bella HTH 888에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Tech Gio-Bella HTH 888 16 페이지. Point of use residential water alkalizer for drinking and cooking
페이지 인쇄3. Before First Usage – There are a number of items to check
prior to turning on the water:
Plug power cord into a 3-pronged 110 VAC outlet. There
•
will be a momentary illumination of all the
user panel LED's.
Open the filter door and verify that the filter
•
has not been dislodged from its mounting
point. A loose filter WILL leak. Rotate filter
with your thumb. It should revolve evenly
between its upper and lower connections.
4. First Usage - Here we will verify operation of the
Gio-Bella.
Locate rear panel rocker-switch for main
•
power and press to the "ON" position.
Turn on COLD water. (Do not turn on
•
hot water since warm or hot water will
damage the built in filter.)
Pull out on the diverter valve button. This
•
will divert the water from the faucet,
through the hose that's attached to the Gio-
Bella.
As soon as the Gio-Bella's water pressure
•
detector senses flow, the ionization
chamber will turn on automatically. The
user panel lights will illuminate, and the last
selected alkalinity level LED will glow. Within several
seconds, water will begin coming out of the metal
dispensing (flex) hose on top of the Gio-Bella. Note that
this dispensing hose may be swiveled nearly 360
degrees, and that it can also be bent to accommodate just
about any container.
7
Verify that filter is
secure
Rear panel
power switch
"ON"
Pull diverter
button to start
Gio-Bella