Emerson FB1100 교체 매뉴얼 - 페이지 5

{카테고리_이름} Emerson FB1100에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB1100 18 페이지. Flow computer coin cell battery field
Emerson FB1100에 대해서도 마찬가지입니다: 종단 보드 현장 교체 매뉴얼 (18 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (20 페이지), 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (8 페이지), 교체 매뉴얼 (8 페이지)

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide

Item

6-connector pluggable terminal blocks (pack of 4)

8-connector pluggable terminal blocks (pack of 4) – (Used with

any FB1200 Flow Computer which has a 6-channel expansion I/O

board)

Ambient Temperature Range

May be used up to a maximum ambient temperature of 80˚C and a minimum ambient

temperature of -40˚C; see product data plate (on device) for ambient temperature.

Required Tools

#1 Phillips-head screwdriver



#2 Phillips-head screwdriver



3/32-inch flat head screwdriver (for 3.81 mm pitch terminal block connections)



1/8-inch flat-head screwdriver (for 5.08 pitch terminal block connections)



3mm hexagonal torque wrench. Ranges must cover 10 to 12 in-lbs (1.1 to 1.4 N-m).

Electrical Ratings

I/O Ratings (FB1200 Flow Computer):



4 Digital Outputs: 0.5A, 24Vdc

2 Analog Outputs: 4-20 mA

Important

Only use accessories supplied with the flow computer or sold by Emerson as spare parts for this

flow computer. Substituting a part you obtain elsewhere (such as a battery) voids your approval

certification.

WARNING

EXPLOSION HAZARD – Substitution of any components may impair suitability for Class I,

Division 1 or Class I, Division 2.

WARNING

Do not disconnect equipment unless power has been removed or the area is known to be non-

hazardous.

WARNING

EXPLOSION HAZARD – Do not replace batteries unless power has been switched off or the

area is known to be non-hazardous. Batteries must only be changed in an area known to be

non-hazardous.

D301820X012

November 2020

Field Replacement Kit

Part Number

395791014-KIT

395803000-KIT