High Tech Modellbanhen 7200 지침 - 페이지 2
{카테고리_이름} High Tech Modellbanhen 7200에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. High Tech Modellbanhen 7200 2 페이지. Led constant lighting
페이지 인쇄Art-Nr: 7200 LED constant lighting
11. The component is also suitable for midget or micro bulbs. The best way to connect them is in
series as described under point 8. The brightness can be regulated as described above. When
connecting them in parallel, with two bulbs, if not sooner, if not sooner, the maximum current
carrying capacity is reached. Do not forget to keep an eye on the temperature as described under
point 9!
12. The component comes with a hole in the middle, so it can be installed with a screw directly below
the train facility. Spacers are not necessary, the soldering points then abut directly on the wood.
13. As said before, with this component you can operate any LED, for example also such ones that
are already built into lamps or other places. The advantage you get from this is the possibility to
regulate the brightness and the constancy of the brightness. You do not need things like a
multiplier or a protecting diode. You can connect the LED with its two lead in wires directly and
without the need for any further parts to the output of the component, see figure 2 and point 5.
14. Do not connect any of the contacts with each other. Unlike with older components, there is no
common mass. All the four contacts carry a different potential.
15. High Tech Modellbahnen manufactures its products with the greatest possible care. We issue a
guarantee and warranty according to legal regulation. Should you find any new product you just
bought defective, please contact your local dealer.
16. If one of our products has been damaged or breaks, please contact your local dealer as well. He
often might be able to save it, while own attempts to repair it might lead to a total economic loss.
Now enjoy your new electronics and always have the lights on your trains shining brightly.
High Tech Modellbahnen
97456 Hambach
www.z-hightech.de
Instructions
page 2