Galeria Selection 4017805424975 운영 매뉴얼 - 페이지 6

{카테고리_이름} Galeria Selection 4017805424975에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galeria Selection 4017805424975 12 페이지. Radio projection clock

Manual setup of date and time

If you are not located within the radio signal range or if there is no reception, you can set the

time manually. The radio clock will nevertheless continue searching for radio signals every hour.

Once a radio signal is being received again, the time will be adjusted automatically.

1. When in normal time display mode, press and hold the MODE button (B6) for several

seconds until you hear a brief acoustic signal indicating the manual setup mode.

2. Press the UP (B4) or DOWN (B3) buttons to configure the settings. Press and hold the

UP (B4) or DOWN (B3) buttons for approx. 2 seconds in order to adjust the values in

fast mode.

3. Press the MODE button (B6) respectively to save the setting and to move to the next

value. Pressing the MODE button (B6) will generate an acoustic signal.

4. Then adjust the other values as described previously in the following order: Year, month,

day, language, time display mode (24 or 12 hour display), time zone, hours and minute.

Setting the calendar



The year indicator starts flashing. Press the UP (B4) and DOWN (B3) buttons to set the

year. Confirm your setting by pressing the MODE (B6) button.

The month indicator starts flashing. Press the UP (B4) and DOWN (B4) buttons to set

the month. Confirm your setting by pressing the MODE (B6) button.

The day indicator starts flashing. Press the UP (B4) and DOWN (B3) buttons to set the

day confirm your setting by pressing the MODE (B6) button.

Manual setup of date and time

Weekday display in 7 languages



The weekday display starts flashing. Press the UP (B4) and DOWN (B3) buttons to

select the desired language. There following languages available to display the

weekday:

German (GER)/English (ENG)/Italian (ITA)/Dutch (NET)/Spanish (ESP)/ Danish (DAN).



Confirm your setting by pressing the MODE (B6) button.

12/24h



The 12h/24h indicator starts flashing. Then press the UP (B4) and DOWN (B3) buttons

to switch between 24-hour and 12-hour display mode. Confirm your setting by pressing

the MODE (B6) button.

Time zone setting (12/-12)

OPERATION MANUAL

RADIO PROJECTION CLOCK

EAN 4 0 1 7 8 0 5 4 2 4 9 7 5