High Tech Pet BE-500 설치 및 운영 매뉴얼 - 페이지 14

{카테고리_이름} High Tech Pet BE-500에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Tech Pet BE-500 17 페이지. Wire and flag kit

bring one collar at a time close to the Test Wire Loop and

verify the collar is triggering. If you hear a beeping tone and see

a flashing red light on the face of the collar the collar is

working and the Base Station Transmitter is working, so go

to step 3) to verify the loop.

f) If you do not hear a beep and see a flashing light on the face of the

collar then either the collar, or the transmitter, or both have

failed. Let's try to isolate the problem down to a single

component.

If you have another collar, repeat step e) on that collar. If

•

that collar passes the test then that collar and the Base

Station Transmitter are OK, and only the first collar is failed

– repair or replace just the first collar.

If you have a friend who also owns a High Tech Pet , Humane

•

Contain system that is working, test your collar(s) on their

operating system by holding your collar next to their

collar in the yard. As you move both collars toward the

wire loop both collars should beep at about the same

rate. If this is true, your collar(s) is working, and your Base

Station Transmitter has failed – repair or replace.

g) If you cannot determine which component has failed,

return both the collar(s) and the Base Station

Transmitter to High Tech Pet Products for analysis

and repair.