gales GS-509 지침 - 페이지 3

{카테고리_이름} gales GS-509에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. gales GS-509 4 페이지.

TROUBLESHOOTING GUIDE
Before calling the Customer Service Number, carefully check the list below for a possible
solution to your question.
POTENTIAL PROBLEM
Unit does not operate on
•Is the unit plugged in? Does the outlet work?
any speed or Pulse.
•Are the bowl, bowl lid, and food chute lid all locked in place? See
pp. 4-"How to Assemble."
• Packing too much food in the food chute, or pushing too hard
Food is not chopped,
on the food pusher may cause the processed food to be
sliced or shredded
irregulary sliced or shredded. Refer to the food processing
uniformly.
charts for recommended sizes and quantities.
•Are the bowl, bowl lid, and food chute lid all locked in place?
They may have moved slighty during processing. See pp. 4
"How to Assemble."
•Is the outlet still working? Check it by plugging in a working
lamp or other appliance. You may have overloaded the circuit
Unit stops and will
and blown a fuse or tripped the circuit breaker.
not come back on.
•Turn unit OFF, allow to stand for 3 to 4 minutes, then turn back
ON. If none of these suggestions correct the problem,DO NOT
attempt to repair the unit. Call the Customer Service number to
get the name of your nearest Authorized Service Center.
•There may be a residue left on the motor from the manufacturing
process, causing a slight odor during initial use. This will go away.
Unit has a burning smell.
If a strong odor or any visible smoke appears, unplug the unit
IMMEDIATELY and call the Customer Service number.
• Are you using the recommended speed for the item you
are processing?
• Are you using the recommended food size and quantity
Motor seems weak.
to be processed? Refer to the food processing charts for
recommended food sizes and speeds.
CLEANING, STORAGE AND MAIMTENANCE
1. Wash bowl, lids, blade, discs,removable drive sleeve and food pusher in hot, soapy water.
Rinse and dry thoroughly.See page 4 for information on how to remove food chute lid for cleaning.
To clean food thoroughly from the bowl and bowl lid/food chute,immerse in hot,soapy water.
NOTE: Do not store unit with lid in locked position; this may put strain on interlock tab.
2.Wipe base, control panel, and cord with a damp cloth or sponge.To remove stubborn soil, use a
mild non-abrasive cleanser.
3.To store, place bowl on base.Then place Chopping/Mixing Blade on motor shaft and Slicer/
Shredder Disc on Chopping/Mixing Blade.The Removable Drive Sleeve may be stored in the bowl.
Place lid on bowl but do not lock.
4.Monthly place a drop of vegetable oil on each screw in the food chute.
PROBABLE CAUSE/SOLUTION
6
instruction concerning use of the appliance by a person their safety.
Children should be supervised to ensure that they do not play with the appliance.
27. This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contactthe retailer where the product was
purchased.They can take this product for environmental safe recycling.
PARTS AND FEATURES
1
2
3
3
4
2
5
1
6
7
8
1、Pushers
2、Lid
3、Maxi-blend canopy
4、Removable drive Sleeve
5、Bowl
6、Motor shaft
7、Rotor
SAVE THESE INSTRUCTIONS!
Other Consumer Safety Information
This appliance is intended for householduse only.
WARNING! Shock Hazard: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
To avoid an electrical circuit overload, do not use another high wattage appliance on
the same circuit with your food processor. The length of the cord used on this appliance
9
10
8、Main machine
9、Dough tool
10、Knife blade
11、Thin slicing/fine shredding disc
3
1 1