High Tech Pet Products BLUEFANG X-22 설치, 운영 및 교육 매뉴얼 - 페이지 13
{카테고리_이름} High Tech Pet Products BLUEFANG X-22에 대한 설치, 운영 및 교육 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Tech Pet Products BLUEFANG X-22 16 페이지. Super electronic dog fence
페이지 인쇄STEP 2: Assemble the Required Tools
Here is the list of tools you will need.
Straight edge spade or power edger
1.
Wire cutter/stripper
2.
Power drill with 1/8" drill bit
3.
Phillips screwdriver or Phillips driver bit for your drill
4.
STEP 3: Set Up the Base Station Transmitter
Mounting:
A. Separate Mounting Base From Electronics Console.
C: Install Optional Rechargeable Battery if Desired.
Indoor mounting of the TX- Base Station Transmitter is preferred.
However, if your layout prohibits indoor mounting, it is acceptable to
mount the TX- outdoors. Although the casing is water-sealed, you
should still choose a location that is not directly exposed to rain, wind
and other adverse weather.
______________________________________________________________________________________
20
www.hightechpet.com
B: Mount the Mounting Base to Your Wall.
D. Reassemble Mounting Base and Electronics Console
by Pushing the Two Pieces Together Firmly.
FIGURE 12
High Tech Pet Products, Inc.
BOUNDARY WIRE
Even the boundary wire used on your
The copper alloy wire and insulating coating are all made specially to our
frequency broadcast conductor, with a mechanically strong core and an
extra thick, extra tough, outdoor grade insulation that resists sunlight
to purchase standard 18 or 20 gauge "hardware store" quality wire.
However, we recommend that you use our custom wire to ensure the
best quality and performance at the best value pricing. Boundary
extension kits are available from www.hitecpet.com and contain
waterproof wire splices. To locate the item go to www.hitecpet.com
and search on "Wire Flag Kit".
___________________________________________________________________________________________
High Tech Pet Products, Inc.
www.hightechpet.com
system is unique.
13