DCI Decade 1011 빠른 시작 매뉴얼

{카테고리_이름} DCI Decade 1011에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCI Decade 1011 2 페이지. Potentiometer and soft limit adjustment

POTENTIOMETER AND SOFT LIMIT

ADJUSTMENT

UPPER POTENTIOMETER: SEAT BACK INCLINE-RECLINE (A-DEC)

Starting Position – Cascade 1040, Performer

Seat Back Fully

Disconnect drive mechanism from potentiometer and remove old potentiometer, and then reinstall

On 1040 chair – Turn the potentiometer shaft

clockwise

until it will no longer turn. Then turn the

shaft counterclockwise 1/8th of a turn and reconnect

the drive shaft.

LOWER POTENTIOMETER: BASE UP-DOWN (A-DEC CASCADE, DECADE)

1. Remove the mounting screw from the assembly.

2. Rotate the potentiometer gear clockwise until rotation

stops.

3. Align the potentiometer assembly, and then rotate

the potentiometer gear counterclockwise two teeth

relative to one tooth on the large drive gear.

4. Reinstall the mounting screw and verify that all

the electrical connections to the limit switch and

potentiometer are properly connected.

UPPER POTENTIOMETER: SEAT BACK INCLINE-RECLINE (PELTON & CRANE)

Reclined

potentiometer into bracket. Prior to connecting drive mechanism:

Chair Fully

Seat Back Fully

Starting Position – Decade 1011/1021

On 1021/Decade chairs – Turn the potentiometer shaft

counterclockwise

the shaft clockwise 1/8th of a turn and reconnect the

drive shaft.

Starting Position

Lowered

Starting Position

Inclined

Seat Back Fully

Inclined

until it will no longer turn. Then turn

Large Drive

Gear

Mounting

Screw

Potentiometer

Gear