DCI Edge SERIES 5 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} DCI Edge SERIES 5에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCI Edge SERIES 5 12 페이지. Side delivery system
DCI Edge SERIES 5에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (11 페이지), 사용 설명서 지침 (8 페이지), 설치 지침 매뉴얼 (14 페이지), 설치 지침 매뉴얼 (13 페이지), 사용 설명서 지침 (19 페이지)

페이지 인쇄
DCI Edge SERIES 5 설치 지침 매뉴얼
SERIES 4 & SERIES 5 CENTER ISLAND CABINET
Installation Instructions
INSTALLATION
SECURE TO THE FLOOR
Wood Floor: Secure the Support Column to the floor using
1
two 1/2" x 3-1/2" lag bolts, washers, and lock washers.
Concrete Floor: Secure the Support Column to the
floor using two 1/2" x 3-1/2" anchor bolts, washers, lock
washers, and nuts.
Ensure the bolts are tightened securely.
2
Re-check plumb of the vertical surfaces of the Support
Column and adjust as necessary.
3
Use two 10-32 fasteners to attach to the seat pan casting.
ADD UPPER REAR STORAGE
Install the rear dress panel using 4 1/4-20 x 2" bolts through the Rear Storage Module. Make sure the bi-fold door
1
rollers are in the track.
Install the top panel and secure by turning the
2
Rafix connectors 180° clockwise in 6 places.
Install the bi-fold doors by clipping on
3
the hinges from the bottom up.
Install the hinge follower into
4
the guide roller and tighten the
screw.
8
WARNING: This cabinet must be bolted
to the floor as directed in this section.
Failure to do so may result in damage
to the cabinet and unsafe operating
conditions.
Standard Storage
X-Ray Storage