Dynasty DY-BT55 설치 지침 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Dynasty DY-BT55에 대한 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty DY-BT55 8 페이지.
Dynasty DY-BT55에 대해서도 마찬가지입니다: 설치 지침 및 운영 매뉴얼 (9 페이지)

Flame button
The fire has four flame effects and a standby, by pressing the flame effect button the unit will cycle
through each condition.
Heater button
Press once turns 650W power on. (Pilot lights illuminated ●○)
Press again turns 1300W power on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Wait 5 minutes.
3) Turn on.
Remote control functions
In order to protect the product from becoming too hot, there is an 8s delay when turning on the heater;
also there is an 8s delay when turning off the heater fan.
Make sure the batteries are installed properly in the remote control.
The effective range of the remote control is up to 4 meters or 13 feet.
ICON
TITLE
POWER
FLAME
HEATER
TEMP
TIMER
Press once turns appliance and flame effects on. Press
again turns appliance and flame effects off.
The fire has four flame effects, by pressing the flame
effect button the unit will cycle through each effect.
Press once turns 650W power on. (Pilot lights
illuminated ●○)
Press again turns 1300W power on (Pilot lights
illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated
○○)
Digital display shows the TEMP setting 23°C (default),
with 14 settings circle from "OFF", "16°C" to "28°C".
The TEMP will increase by 1°C up to 28°C when
pressed each time.
By pressing the TEMP for 3S, the digital display can
show between °C and °F.
Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,8H,
to 9H.
FUNCTION
7