Emerson PACSystems RX3i 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Emerson PACSystems RX3i에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson PACSystems RX3i 18 페이지. Canopen master
Emerson PACSystems RX3i에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지)
페이지 인쇄
Hardware Installation
Initial Checks
Upon receiving your RX3i equipment, carefully inspect all shipping
containers for damage. If any part of the system is damaged, notify the
carrier immediately. The damaged shipping container should be saved as
evidence for inspection by the carrier.
As the consignee, it is your responsibility to register a claim with the carrier
for damage incurred during shipment. Emerson Automation Solutions will
fully cooperate with you, however, should such action be necessary.
After unpacking the RX3i equipment, record all serial numbers. Serial
numbers are required if you should need to contact Customer Care during
the warranty period. All shipping containers and all packing material should
be saved should it be necessary to transport or ship any part of the system.
Verify that all components of the system have been received and that they
agree with your order. If the system received does not agree with your
order, contact Customer Care.
Installation Location
This product is intended for use with the RX3i system. Its components are
considered open equipment (having live electrical parts that may be
accessible to users) and must be installed in an ultimate enclosure that is
manufactured to provide safety. As a minimum, the enclosure shall provide
a degree of protection against solid objects as small as 12 mm (e.g. fingers).
This equates to a NEMA/UL Type 1 enclosure or an IEC60529 IP20 rating
providing at least a pollution degree 2 environment. For details about
10
PACSystems™ RX3i Central Processing Unit IC695CPE302
GFK-3038B