DCI LLC DigiTrak F Series 운영자 매뉴얼 - 페이지 5
{카테고리_이름} DCI LLC DigiTrak F Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCI LLC DigiTrak F Series 12 페이지.
페이지 인쇄
General Description
AC power
cord
The DigiTrak
AC adapter. Rechargeable lithium-ion (li-ion) F Series battery packs (FBP) are included with
a complete locating system and also sold separately. The battery packs power all current
DigiTrak receivers and battery-operated remote displays. The FBC battery charger can
operate from AC (100–240 V, 50–60 Hz, 1.5 A max.) or DC (10–28 V, 5 A max.) power
sources. The AC power cord provided with your
charger is standard to your global region.
A fully charged F Series FBP will power an F5
receiver for approximately 10 hours or an FSD
remote for approximately 14 hours before
recharging is necessary. A battery pack can be
recharged about 400 times before the battery life
is substantially reduced.
To check the charge status of a battery
pack at any time, press the battery status
button below the five LEDs. The LEDs indicate the
charge level, with each representing 20% of the
charge.
Insert a fully charged DigiTrak F Series battery
pack so it is flush with the back of the receiver and the tab is securely latched. To remove the
battery pack, push down on the battery tab and pull the battery pack out and up from the
battery compartment.
FBC Operator's Manual
DigiTrak
D
IGITAL
AC adapter
F Series Battery Charger Shown with Three FBP Batteries
F Series™ Battery Charger (FBC) includes AC and DC power cords and an
C
I
ONTROL
NCORPORATED
DC power
cord
F Series Battery Pack
F Series battery
charger
F Series
battery packs
LEDs indicate
charge level
(shown 80% full)
Battery status
button
1