DCI LLC PoE PSE TP-Fiber 사용자 설명서 - 페이지 6

{카테고리_이름} DCI LLC PoE PSE TP-Fiber에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DCI LLC PoE PSE TP-Fiber 15 페이지. 10/100base-tx to 100base-fx poe pse fe media converter;

페이지 인쇄

IEEE802.3u 100Mbps Fast Ethernet supports two types of media, 10/100Base-

TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through)

feature enhances the TP-Fiber Link integrity and conformity. Either one of TP or

Fiber port is in link-fail state, the LFP converter forces the other port to be at link-

disabled state. The PSE media converter complies with IEEE 802.3af, its advanced

auto-sensing algorithm enables providing power devices (PD) discovery,

classification, current limit, and other necessary functions. It also supports high safety

with short circuit protection and power-out auto-detection to PD.

Model

PoE PSE TP-Fiber

The 100Mbps Fiber Transceiver

ST/SC/LC multi-mode 2Km

SC/LC.S05/S20/S40/S60Km

single-mode

SC/LC.S80/S100Km single-mode

∗:Any other fiber model, such as MT-RJ is available upon request.

Single Fiber Model

1310nm Single-Mode 20Km

40/60Km models are option

∗

1550nm Single-Mode 20Km

40/60Km models are option

∗

Note:

The 1310nm and 1550nm models must be installed in pairs, i.e., install 1310nm

model at one end and 1550nm model at the other one.

1. Overview

2. Model Description

AC Line: 100-240V 50-60Hz

Power Description

Wavelength

1310nm

1550nm

TX, RX Wavelength

TX (Transmit)

RX (Receive)

TX (Transmit)

RX (Receive)

1310nm

1550nm

1310nm