Dynasty Fireplaces BG-100/with Glass Face 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Dynasty Fireplaces BG-100/with Glass Face에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty Fireplaces BG-100/with Glass Face 15 페이지. Linear wall mount electric fireplace
페이지 인쇄
B. Installation
IT IS IMPORTANT TO READ THROUGH THE INSTALLATION
INSTRUCTIONS BEFORE COMMENCING THE INSTALLATION.
1.
Select the position of the fireplace on the wall to which it is to be
mounted. Draw a level horizontal line on the wall at the required
height. This line will correspond to the top of the appliance so it is
important to allow for the extra height of the fireplace front.
2.
Mark the central line of the fireplace box on to the horizontal line
3.
Place the Mounting Plate supplied to the horizontal line and line up
the central "V" cut out with you centre line. See Figure 1.
4.
Mark out at least four of the fixing holes through the mounting plate
to the wall. It is imperative that the mounting plate is secured firmly
to the wall. See Figure 1.
5.
If the wall is of a sound masonry construction the fixing holes should
be drilled with an 8 mm masonry drill. Then appropriately sized
screws and raw plugs should be used to secure the fixing plate. At
this point it is important that a firm and secure fixing is achieved. If