Dynasty Fireplaces DY-BTW48 주택 소유자 설치 지침 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Dynasty Fireplaces DY-BTW48에 대한 주택 소유자 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty Fireplaces DY-BTW48 16 페이지.

 WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK---DO NOT USE THIS

HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.

 For residential use only! NOT for commercial use! Any commercial or public use of this

heater voids all warranties, and could cause injury.

 This product is not intended to be a primary heat source. It is for supplemental heat

only.

 INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric

shock!

 Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!

 NEVER modify this heater.

damage. Modification of this fireplace completely voids all warranties.

 ALWAYS turn this heater off before unplugging it from the outlet.

 ALWAYS disconnect this unit from the power supply before performing any assembly or

cleaning, or before relocating the electric fireplace.

 NEVER leave this heater unattended.

 ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.

 ONLY use this heater on a 120V AC 15-Amp circuit. NEVER overload the circuit. If this

heater trips the circuit breaker, unplug all other appliances on the same circuit before the

next use. Avoid plugging other appliances into the same circuit as this heater.

 NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or

connections. Plugging this heater into a faulty outlet could result in electric arcing

within the outlet that could cause the outlet to overheat or catch fire.

 ALWAYS check your heater cord and plug connections with each use!

a. MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs

can cause the outlet to overheat.

b. Heaters draw more current than small appliances. Overheating may occur even if it has

not occurred with the use of other appliances.

c. During use check frequently to see if the plug outlet or faceplate is HOT! If the outlet or

faceplate is HOT, discontinue use immediately and have a qualified electrician inspect

and/or replace the faulty outlets.

 This heater has a polarized plug (one blade is wider than the

other). As a safety feature to reduce the risk of electrical shock,

this plug is intended to fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician. Do not attempt to

defeat this safety feature.

SAVE THESE INSTRUCTIONS!



Doing so could result in personal injury or property

ALWAYS unplug this heater when not in use.