Dynasty Fireplaces EF43D 설치 지침 및 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dynasty Fireplaces EF43D에 대한 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty Fireplaces EF43D 9 페이지. Electric heater with remote control
Dynasty Fireplaces EF43D에 대해서도 마찬가지입니다: 주택 소유자 설치 지침 및 운영 매뉴얼 (8 페이지)

페이지 인쇄

WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the

electric fireplace.

Installation:

NOTE ！

•

After installation, ensure that there is a space between the wall and the

fireplace insert.

Install insert:

！！！ When inserting the heating unit into mantel; Do not let the bottom of the insert touch the

mantel to avoid scratching it.

Plug the power supply cord into a wall outlet (120Vac, 60Hz). The cord has a plug as shown at A.

You should connect as shown below:

ELECTRICAL CONNECTION

A 15 AMP, 120 Volt, the unit comes standard with 6 feet (1.8 m) three wire cord and plug, exiting

from the rear of the fireplace. Plan the installation to avoid the use of an extension cord. Preferably,

the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the

circuit breaker to trip or the fuse to blow when the heater is in operation.

GROUNDING

Grounding methods