Dynasty Fireplaces EF44D 설치 지침 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} Dynasty Fireplaces EF44D에 대한 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynasty Fireplaces EF44D 9 페이지. Electric heater with remote control
Dynasty Fireplaces EF44D에 대해서도 마찬가지입니다: 주택 소유자 설치 지침 및 운영 매뉴얼 (8 페이지)

페이지 인쇄

Control Panel

Located on the right and top side panel of the fireplace.

BUTTON

POWER SWITCH

HEATER

THERMOSTAT

NAME

Turn on the main power supply. A long "beep" sound will be

heard when the switch is turned on On Position "I".

Note: The remote control will lost the memory for function

settings when the switch is turned on Off Position "0".

The flame will be cycled Flame A – Flame B – Flame C –

Flame Off.

FLAME

Flame A: full bright flame + little blue

Flame B: full bright flame

Flame C: half bright flame

The heater will be cycled Low – High – Heater Off. You will

see the indicator light illuminates on left to Power Switch.

The indicator light goes out within 10s.

Low: (●○)

High: (●●)

Note:

1. Heater can be used without flame.

2. Whether the heating is working depends on whether the

settled temperature by thermostat is higher than the

environment temperature.

3. The Fan works anterior to the heater about 10s and turns

off later than the heater about 10s.

4. The indicator light in the lower fuel bed always illuminates

when heater is on.

Start with setting 9 and when the room has reached a

desired level, turn the rotary switch counterclockwise until

the thermostat just 'clicks' off. The thermostat will then

maintain the room at the selected level. To increase the

temperature, turn the rotary switch clockwise to a higher

setting.

FUNCTION