High-Flying HF-LPD100 사용자 설명서 - 페이지 13
{카테고리_이름} High-Flying HF-LPD100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. High-Flying HF-LPD100 16 페이지. 802.11a/b/g/n wifi module
페이지 인쇄
HF-LPD100 Low Power WiFi Module User Manual
2. PACKAGE INFORMATION
2.1. Recommended Reflow Profile
NO.
1
2
Note: 1. Recommend to supply N2 for reflow oven.
2. N2 atmosphere during reflow (O2<300ppm)
2.2. Device Handling Instruction (Module IC SMT Preparation)
Shelf life in sealed bag: 12 months, at <30℃ and <60% relative humidity
1.
2.
After bag is opened, devices that will be re-baked required after last baked with window time
168 hours.
3.
Recommend to oven bake with N2 supplied
4.
Recommend end to reflow oven with N2 supplied
Baked required with 24 hours at 125+-5. 0℃ before rework process
5.
Recommend to store at ≦10% RH with vacuum packing
6.
If SMT process needs twice reflow:
7.
(1) Top side SMT and reflow
Case 1: Wifi module mounted on top side. Need to bake when bottom side process over 168
hours window time, no need to bake within 168 hours
Case 2: Wifi module mounted on bottom side, follow normal bake rule before process
Note: Window time means from last bake end to next reflow start that has 168 hours space.
High-Flying Electronics Technology Co., Ltd.(www.hi-flying.com)
Figure 7.
Table7.
Reflow Soldering Parameter
Item
Temperature (Degree)
Reflow Time
Peak-Temp
Reflow Soldering Profile
Time of above 220
260 max
(2) Bottom side SMT and reflow
Time(Sec)
35~55 sec