AUTOPMALL MV720 사용자 설명서 - 페이지 6

{카테고리_이름} AUTOPMALL MV720에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUTOPMALL MV720 10 페이지.

5. Functions Explanation

Please follow with the quick user guide carefully!

a. Vibration Alert:

This vibration alert function just work under stationary

status. How to use this function:

* Set admin number by this sms command:

admin123456+space+mobile number with country code

* Enable the device to enter into arm mode by this

sms command:

111

* Conifgure the alarm ways by this sms command:

vibalm123456

* Keep the device under stationary status more than 5min to let it enter into sleep arm mode;

* Vibrate the device then the tracker will send the vibration alarm messages

b. Cut Off Fuel/Resume Fuel

* Set admin number by this sms command:

admin123456+space+mobile number with country code

* Send this sms command from the admin number to cut

off

fuel:555

NOTE

make sure the fuel circuit is connecting to main power. Secondly,

it has 3 different performance, please read it carefully:

* If the network signal and satellite signal both are available, when the equipment speed

exceeds 20km/h, the fuel circuit will not be cut off immediately, it will cut off intermittently

till the speed is below 20km/h, then just can be completely cut off.

* In the tracker has network signal and but no satellite signal, the fuel circuit will be cut

off intermittently, after 2, 3 minutes it will be cut off completely;

* If the tracker stopped more than 5 minutes, the fuel circuit will be cut off immediately,

and then connected, but if you vibrate the tracker or vibrate the tracker the fuel cirsuit will

be cut off immediately;

:About the cut off fuel function, firstly please

For example:

MV720

admin123456 0086134********

admin ok

arm o k

vibalm123456

vibrate sm s ala rm set o k

For example:

MV720

admin123456 0086134********

admin o k

cut oil ok

111

555