Galileo ADP 3000 빠른 참조 - 페이지 10

{카테고리_이름} Galileo ADP 3000에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Galileo ADP 3000 15 페이지.

Installing the Locking Cover 3000

The printed document locking Cover secures documents that are already printed and are waiting in the internal

stacker. Use of the printed document Locking Cover is optional. The stacker, with or without cover, holds

approximately 80 coupons.

You must remove the Locking Cover before attempting to open the right side door to clear a jam.

1. Hold Locking Cover so lock is facing up and to the rear of printer. Open side will be facing down

toward printer.

2. Turn key clockwise (right) until it stops.

3. Line up the Locking Cover so the sides of cover slide along the guides on the front of internal stacker

until it is seated into printer housing. (See figure 1 on page 3 for location of internal stacker.)

Line up and slide down

Lock cover

Stacker on

Front of printer

4. Turn the key counterclockwise (left) to lock the cover into place.

1. Turn the key counterclockwise (left) to unlock the cover.

2. Slide cover up and off of the printer housing.

3. Remove any printed documents

Lock