GalileoSky v 5.1 사용자 설명서 - 페이지 4

{카테고리_이름} GalileoSky v 5.1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GalileoSky v 5.1 10 페이지. Switching on devices for the first time

Switching on Galileosky 5.0, 5.1 Devices for the First Time

version 6 dated from June 19, 2018

Preparing of Galileosky
Device to Switch-on

Preparing of a tracking device socket unit

Together with a device you get a counterpart of socket and several crimped conductors.
On the back of the case there is a schematic representation of the contacts to be connected
and location of main technological holes (Pic. 1).
ATTENTION!
The symbol of terminal board key is sometimes perceived as a connection
strap between RS232 and RS485 contacts (tracking device v5.0) or Vol0 and 1-Wire
(tracking device v2.2.8). Be careful, there should not be any connection strap!
The order of terminal board assembling is as follows:
1.
Rotate the terminal board in such a way that the key has been at the top of the socket
and the places of conductors connection have been directed towards the user (Pic. 2);
Pic. 1
Scheme of contacts
location
Pic. 2
Terminal boards
4