DCN EAP280-L 빠른 설치 매뉴얼 - 페이지 2

{카테고리_이름} DCN EAP280-L에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DCN EAP280-L 11 페이지. Indoor wireless ap

Equipment Installation

Preparing for Installation

Before installation, installation personnel must take the necessary safety

measures to ensure personal safety

Do not put AP and Tool on walkways to avoid damage

Device support wall mounting and ceiling mounting，make sure the ceiling and walls

can bear safety before installation

Installation may need tools listed on the below picture.(Tools need to self prepared)

Ladder

Marker Pen

Wall Mounting

Please follow the length and width in picture 1, and then use marker pen to mark the drilling

location.

is covert security installation

downward).

Please use 6mm drill head, drill holes with a depth of 35-40mm according to the marked place.

Plug in the holes with nut and use a hammer to knock the nut.

Put the mounting kit's hole accurate to nut and use three screw to install mounting kit to the wall.

Put the mounting holes behind of the AP onto the mounting kit's pegs and then pull the AP

down until copper direction to complete installation.

Attention

Please plug in cable before the installation to the wall else after installation, cable cannot be plugged in.

Hand Driller

Phillips

screwdriver

is insecurity installation (The figure draw line

Claw

Hammer