GalileoSky 4.0 사용자 설명서 - 페이지 10
{카테고리_이름} GalileoSky 4.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GalileoSky 4.0 13 페이지. Rs232, rs485
페이지 인쇄
RS232, RS485. Connection and Operation of Galileosky Photo Camera
(version 3 dated from August 8, 2018)
3.
Parameter "Recording in geofence" defines the behavior of the tracking unit on taking
pictures by the camera depending on the use of Geofences.
4.
Parameter "Size" allows you to set the picture resolution: 640х480 or 320х240
points. If GPRS-connection is not very good, it is recommended to set a lower
resolution which would allow increase the speed of pictures transmission to the
monitoring server.
5.
The last parameter "Require an acknowledgment from server" defines the server
behavior when receiving a picture. As the pictures are divided into parts and
transmitted to the server in this way because of the big size, in case of lack of
confirmation by the server and loss of one of the packets the whole picture is lost.
Therefore, it is necessary to set this parameter for guaranteed transmission of the
picture.
Camera captures received by the monitoring software are displayed in the column
"Image" in the monitoring software (Pic. 9).
Pic. 9
Example of pictures display in
the monitoring server
10