Dynatech PR-2500-UD Series 사용 설명서 지침 - 페이지 3

{카테고리_이름} Dynatech PR-2500-UD Series에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech PR-2500-UD Series 11 페이지. Progressive safety gear
Dynatech PR-2500-UD Series에 대해서도 마찬가지입니다: 사용 지침 및 유지 관리 매뉴얼 (19 페이지)

페이지 인쇄

1. Series Asg-XXX Ud/ Asg-XXX

INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00

Date: 29/06/2016

Revision: 00

1 BACKGROUND

Dynatech equipment is assembled according to customer specifications, so handling is not necessary. If the

shoe needs to be replaced, Dynatech offers customers this manual for the proper conduct of this work.

However, under no circumstances will Dynatech be held responsible for any error or deterioration in the

equipment following handling by non-Dynatech personnel, even if they follow the manual instructions.

Dynatech or your nearest dealer must be contacted for the replacement shoes, according to the

necessary guide rail width.

The following details must be provided:

Safety gear model

New guide rail width (to select replacement shoe)

Series number

2 SHOE REPLACEMENT ACCORDING TO SAFETY GEAR MODEL

2.1 SERIES ASG-XXX UD/ ASG-XXX

There are three safety gear types of this model, depending on the thickness of the shoe assembled. The

safety gear types refer to the guide rail centre position in relation to the frame attachment holes, which are in

accordance with the measurement recommended in the safety gear (DYN.32) usage and maintenance

instructions. Thus, the gap between the shoe and guide rail established by Dynatech is observed.

TYPE

THICKNESS (mm)

The steps for replacing the shoe to change the thickness are as follows:

1. The following must be available:

Replacement shoe: with the new guide rail thickness.

Stickers with the new guide rail thickness.

7-8-9-10

11-12-13

14-15-16