Dynatech PR-2500-UD.V50 사용 지침 및 유지 관리 매뉴얼 - 페이지 13

{카테고리_이름} Dynatech PR-2500-UD.V50에 대한 사용 지침 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech PR-2500-UD.V50 19 페이지. Progressive safety gear

INSTRUCTIONS : PR-2500-UD

Date: 15/04/2016

Revision: 08

Figure 5: Roller position

During assembly, the safety gear should be perfectly aligned with the guide rails, both vertically and

horizontally. Improper assembly may cause the safety gear to function incorrectly.

3.2 SAFETY GEAR ADJUSTMENT

The guide rail's position in the block should be adjusted as follows: The side of the guide rail 1.5 mm from the

brake shoe; the head of the guide rail 3 mm from the back of the groove (see drawing DYN 05.C001.01 / DYN

05.C002.01).

⚠

In order to avoid problems with the installation's normal operation, it is very important that the person

carrying out the installation rigorously observes the distances mentioned in this item.

⚠

It should be checked that the safety gear is placed so that the rollers for downwards jamming, marked

with the letter "D", are on the bottom part of the safety gear, as is shown in item 3.1.

Cod : DYN 05.01.08

Figure 7: Improper assembly

Figure 6: Roller position on inverted guide rails