Dynatech PQ-4000 UD 사용 설명서 지침 - 페이지 10

{카테고리_이름} Dynatech PQ-4000 UD에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech PQ-4000 UD 11 페이지. Progressive safety gear
Dynatech PQ-4000 UD에 대해서도 마찬가지입니다: 사용 지침 및 유지 관리 매뉴얼 (19 페이지)

페이지 인쇄
Dynatech PQ-4000 UD 사용 설명서 지침
INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00
Date: 29/06/2016
Revision: 00
-
Stickers with the new guide rail thickness.
2. Removing the sticker from the safety gear
3. Unscrew the DIN 912 M6 screws from the shoe according to Figure9Figure7.
4. Replace the shoe for one of the appropriate thickness.
5. Replace the screws.
6. Use the appropriate screw size thickness according to the assembled shoe thickness:
⚠
For these safety gear models, adapting the shoe thickness to the guide rail centre is done via
the block. If the shoe replacement is not the same type, they will not fit together. The hole
measurements to the guide rail centres that appear in the usage and maintenance instructions
Figure8 Safety gear PR-2000 UD V50
Shoe thickness
5
6-7
8-9
10-11-12-13
14-15
16
Screw type
M6x25 DIN 912 8.8
M6x22 DIN 912 8.8
M6x20 DIN 912 8.8
M6x16 DIN 912 8.8
M6x14 DIN 912 8.8
M6x12 DIN 912 8.8
10