Dynatech QUASAR T25 A3 사용 지침 및 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} Dynatech QUASAR T25 A3에 대한 사용 지침 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynatech QUASAR T25 A3 9 페이지. Ucm unit
Dynatech QUASAR T25 A3에 대해서도 마찬가지입니다: 사용 지침 및 유지 관리 매뉴얼 (8 페이지)

페이지 인쇄

Instruction Manual: SD-Box + QUASAR T25 A3 + ASG UD

Date: 25-02-20

Revision: 00

The protection of this system against UCM is as follows: The SD-BOX electronic system compares, at all times, the

status of the car doors and the floor level via input signals from the installation. These signals are:

•

Doors closed.

•

Floor level or unlocking zone.

•

Motor contactor

N.B.: Please check the electrical characteristics in the SD-BOX manual in order to verify the voltage of the signals to

be entered, as well as their nature.

By using these inputs, if the SD-BOX detects that the car leaves door level with doors open, the contactor in the

safety line is activated, which causes the QUASAR T25 A3 governor's parking system coil to de-energise. This will

make the parking system interlocking system operate on the governor's centrifugal systems, thus causing the

governor to interlock.

Since the movement of the interlocking system is linked to the operating driving bar, when the governor interlocks,

the driving bar will operate on the safety gears thus causing them to jam and the car to brake.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/

Cod: DYN 62.07.00

FIGURE 3: QUASAR T25 A3 Governor